3.5 Display Invert & Non-Invert
The camera on the DVR can be rotated 300° and the screen displays upside down if the camera
has been rotated 180°.
To display correctly, press the MIC button/REC button for 3 seconds for invert display and
non-invert display.
Please Note: The setting of the display will be saved automatically after the recorder is turned off.
3.6 G-Sensor
The G-Sensor will be activated if the car collides during recording. The recorder will display a
symbol of a lock for 10 seconds before colliding and the next 20 seconds will be saved automati-
cally as a special video. This video will not be covered during loop-recording.
Please Note: The saved locked video will be named with a ZW at the beginning, while normal
videos named start with AW.
The sensitivity of the G-Sensor is adjustable; default setting is “middle”.
3.7 Video Locking
The video locking function is designed to prevent important evidence being overwritten by loop
recording. To lock a video, press the video lock button while recording, current video will be saved
pre 10 seconds and the next 20 seconds.
3.8 Date/Time Setting
The Date/Time settings allows you to adjust the time and date to local time so that video files can
be found easily by searching when any incident occured.
12
To Next Page
Loading...