3.9 AudioOn/Off by One Button
To record without sound, press the MIC button under video recording. When the microphone sign
at the bottom of the display is white, the MIC has been switched off. Press the MIC button again
and the microphone will turn blue. This means the MIC has been switched on.
The MIC setting will be automatically saved, so there is no need to edit again after the device has
been restarted.
3.10 U Flash Mode
3.11 Playback
To enter playback mode, press the camera button for 3 seconds when the recorder is switched
on. Select videos and images by using the page up/down button and press the camera button
to play a video. To exit playback mode, press the camera button for 3 seconds.
13
Connect the recorder to your PC with a USB cable and the display of the recorder will show 3
options: USB Disk, PC Camera and REC Mode. Select the options by using the page up/down
button. To enter U Flash Mode, select the USB Disk and confirm with the video lock button.
Please use an SD card reader and Micro SD card to copy videos from recorder to PC.
To Next Page
Loading...