EasyManua.ls Logo

SMART EQ forfour - Setting Values

SMART EQ forfour
220 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Pre-entry climate control and charging
display
:
Time of the full charge
;
Charge status of the battery
=
Departure time
?
Smart-Charging
A
Charge current and charge output
An arrow underneath the battery indicates
the charge status of the battery at the depar-
ture time. The charge status and the time of
complete charge are only predicted approx-
imately. The time of complete charge cannot
be displayed when Smart-Charging is acti-
vated.
Information on the "Pre-entry climate con-
trol at departure time" function (Y page 95).
Messages and service display
:
Message memory
;
Next service due date
The display shows the number of display
messages in the message memory and the
next service due date.
¯ indicates a minor service. ° indi-
cates a major service.
To show the display messages, the ignition
must be switched on.
X
Press a to scroll through the display
messages.
Current information on the type of service
can be obtained at a smart centre or a quali-
fied specialist workshop.
Digital speedometer display
The display shows the digital speedometer.
The digital speedometer in the header is hid-
den.
United Kingdom only: the digital speedome-
ter in the header continues to be displayed.
Setting values
Setting values (monochrome display)
Setting the time
X
Press ´ repeatedly until ° is shown
next to the time.
X
Press a until the hour display flashes.
X
Set values.
Deactivating or activating Active Brake
Assist
X
Press ´ several times until Ä and
° are displayed.
X
Press a until on or OFF appears below
Ä.
The ^ indicator lamp lights up when
Active Brake Assist is deactivated.
Resetting values
The trip meter display and eco score display
can be reset.
X
Scroll to the desired display.
X
Press a for three seconds.
Setting values (colour display)
Setting values
X
Press 9 or : to scroll to Settings.
X
Press 9 or : to scroll to the desired
menu.
Setting values
109
>> Operating the on-board computer.
Z

Table of Contents

Related product manuals