Enlarging the load compartment
Folding the rear seat backrest forward
G
WARNING
If the rear bench seat/rear seat and seat
backrest are not engaged they could fold
forwards, e.g. when braking suddenly or in
the event of an accident.
R
The vehicle occupant would thereby be
pushed into the seat belt by the rear
bench seat/rear seat or by the seat back-
rest. The seat belt cannot protect as
intended and could result in additional
injury.
R
Objects or loads in the boot/luggage
compartment cannot be restrained by
the seat backrest.
This poses an increased risk of injury.
Before every trip, make sure that the seat
backrests and the rear bench seat/rear
seat are engaged before every trip.
X
Push the head restraints all the way in.
X
Pull right or left loop : on the seat back-
rest in the direction of the arrow.
X
Fold down the seat backrest fully.
Folding back the rear seat backrests
!
Make sure that the seat belt does not
become trapped when folding the rear seat
backrest back. Otherwise, it could be dam-
aged.
X
Fold back the left or right seat backrest
until it engages.
Red lock status indicator : on the loop
must no longer be visible.
Folding the front-passenger seat
backrest forwards
Folding down the front-passenger seat
backrest (using the lever)
Seat with a lever
X
Lift lever ; and slide the front passenger
seat to its rearmost position.
X
Pull lever : forwards.
X
Fold the seat backrest forwards at the same
time.
Enlarging the load compartment
151
>> Loading and stowing.
Z
To Next Page
Loading...
