Holding and continuing a call
X
To place a call on hold: select Â.
X
To continue the call: press the 9 button.
Transferring a call to the mobile phone
X
Select z.
X
To transfer the call back to the smart
Audio-System: press 9.
Entering numbers or characters during a
call
X
Select #123.
X
Enter numbers or characters.
Ending a call
X
Press the 9 button.
Using voice control of the mobile phone
Useful information
Voice control of the connected mobile phone
can be used (see manufacturer's operating
instructions). Not all voice control services
are supported by the smart Audio-System.
Voice control must be activated in the set-
tings menu of the mobile phone.
Starting voice control of the mobile
phone
X
Connect the mobile phone with the smart
Audio-System via Bluetooth
®
.
X
Press the button on the steering
wheel.
A message appears in the display of the
smart Audio-System and a tone sounds.
Voice control of the mobile phone is active.
X
Say a command.
Ending voice control of the mobile phone
X
Press the button on the steering
wheel.
or
X
Press the 9 button.
Voice control of the mobile phone is ended.
Operating external data storage media
Useful information
You can switch between the following media
sources, depending on the type of external
data carrier connected:
R
USB 1 or iPod 1
R
USB 2 or iPod 2
R
AUX (external audio equipment)
R
BT Audio (with Bluetooth
®
connected
device, such as a mobile phone)
Selecting external data carriers
X
Press the Õ button repeatedly until the
desired media source appears in the dis-
play.
Operating a USB device or iPod
®
Connecting a device
X
Connect the device to the USB port.
The device is activated automatically and
the first track is played.
Selecting a track
X
In USB mode, press the 9 button.
Available tracks or folders are displayed.
X
Turn control B.
X
Press 9 to confirm.
Rapid search
X
Press the 9 button.
An entry field appears.
X
To enter characters, turn control B and
press the 9 button.
118
Operating external data storage media
>> Using the smart Audio-System.