EasyManua.ls Logo

SMART EQ forfour - Page 87

SMART EQ forfour
220 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Charging the battery using a mains
socket
Connecting a charging cable
:
Charge socket flap
;
Socket cap
=
Locking mechanism
?
Indicator lamp
A
Vehicle socket
X
Fully unwind the charging cable before
charging.
X
Engage transmission position j.
X
Turn the key to position u in the ignition
lock and remove it.
X
Open socket flap : (Y page 80).
X
Release locking mechanism = on socket
cap ;.
Socket cap ; opens.
X
Insert the mains plug into the mains socket
to the stop.
X
Only for charging cable version 2: set the
desired charge current.
X
Insert the charging cable connector into
vehicle socket A to the stop.
The vehicle socket locks audibly.
The high-voltage battery is charged and
indicator lamp ? on the vehicle socket
slowly flashes green.
i
The high-voltage battery is fully
charged when indicator lamp ? on the
vehicle socket lights up green perma-
nently.
i
The vehicle must not be moved during
charging. The gear lever cannot be shifted
from position j.
i
Depending on the temperature, the
engine cooling system and battery cooling
system may audibly switch on during the
charging process.
i
Only for charging cable version 2: if
charging the vehicle's high-voltage bat-
tery is taking longer than usual, check the
maximum charge current settings.
Removing the charging cable
!
Always disconnect the charging cable
from the vehicle socket first. Disconnect-
ing the charging cable from the stationary
socket first could damage the charging
cable connector.
The charging cable can be removed when the
high-voltage battery is completely charged
or charging has to be interrupted.
X
Press the % button on the key.
Indicator lamp ? above vehicle socket A
goes out. Vehicle socket A unlocks audi-
bly.
X
Disconnect the charging cable within
60 seconds from vehicle socket A. Other-
wise, the vehicle will relock the vehicle
socket.
X
Close socket cap ;.
X
Close charge socket flap :.
X
Remove the charging cable from the mains
socket.
X
Stow the charging cable safely in the
charging cable bag (Y page 85).
Storing the charging cable
!
The charging cable must be stowed in the
charging cable bag only to prevent it from
being thrown around inside the vehicle.
X
Stow the charging cable in the charging
cable bag.
The charging cable bag is located in the boot
(Y page 153).
Charging the high-voltage battery
85
>> Driving.
Z

Table of Contents

Related product manuals