Fitting
If you wish to use cargo compartment cover
blind : as normal, assemble it in top
mountings ;. If you do not need the cargo
compartment cover blind, insert in bottom
mountings =.
X
Open the tailgate.
X
Secure cargo compartment cover
blind : at the front of the cargo
compartment with the parcel net bag.
X
Insert cargo compartment cover
blind : on the right-hand side in top
mounting ; or in bottom mounting =.
X
Push handle ? to the right in the
direction of the arrow.
X
Insert cargo compartment cover
blind : in top mounting ; or bottom
mounting = in the left-hand side
paneling and release handle ?.
X
Cargo compartment cover blind :
engages.
X
Pull parcel net bag A down slightly and
secure with the hook and loop fastener.
X
Remove in reverse order.
Controls
X
Closing: Take hold of cargo compartment
cover blind : in the middle and pull
backwards.
X
Guide cargo compartment cover
blind : into the rear right and left
mountings ;.
X
Opening: Take hold of cargo compartment
cover blind : in the middle, pull
backwards, and remove from rear
mountings ;.
X
Guide cargo compartment cover
blind : into position.
Coat hooks
The coat hooks are located at the rear roof
rail on the driver’s and passenger side.
Loading and storing
101
>> Controls.
Z
To Next Page
Loading...
Need help?
General
