X
Detach electrical connectors ;.
X
Remove bulb =.
X
Insert the new bulb.
X
Attach electrical connectors ;.
X
Fit the license plate lamp unit on the
right and press gently on the left.
The license plate lamp unit must audibly
engage.
Replacing interior lighting lamps
A 12 V/10 W bulb is required.
X
Removing: Use a flat object to pry the
lamp lens : off from the passenger side.
X
Detach electrical connector ; from the
interior lamp.
X
Remove bulb = from mount ?.
X
Installing: Insert the new bulb.
X
Attach electrical connector ; to the
interior lamp.
X
Fit the lamp lens on the left in the
opening and press gently on the right.
The lamp lens must audibly engage.
Replacing wiper blades
About replacing wiper blades
G
WARNING
For safety reasons, switch off the wipers
and remove the key from the starter switch
before replacing a wiper blade. The
windshield wipers could otherwise be set
in motion and cause injury.
G
WARNING
Wiper blades are components that are
subject to wear and tear. Replace the wiper
blades at least twice a year, preferably in
the spring and fall. Otherwise the windows
will not be properlywiped. As a result, you
may not be able to observe surrounding
traffic conditions and could cause an
accident.
!
Hold on to the wiper when folding the
wiper arm back. If released, the force of
the impact from the windshield wiper
178
Replacing wiper blades
>> Practical hints.
To Next Page
Loading...
Need help?
General
