SMART fortwo cabriolet - Unlocking;Locking Manually

Problem Possible causes/consequences and M Solutions
A warning signal
sounds when parking.
You have not engaged the parking brake before releasing the
brake pedal and switching off the drive system.
X
Switch on the ignition to deactivate the acoustic warning.
X
Engage the parking brake.
X
Make sure the gear selector lever is in park position P.
X
Turn the key to starter switch position 0.
X
Remove the key from the starter switch.
For safety, it is important that you perform the parking
procedure as described (Y page 75).
You can hear a
continuous noise from
the front axle when
braking.
The vehicle is equipped with a mechanical/acoustic brake pad
indicator.
X
Have the brake pads checked at an authorized electric drive
smart center.
Unlocking/locking manually
Unlocking the vehicle
You can unlock the driver’s door and the
charge socketflap by unlocking the
driver’s door using the key. The lock
cylinder is fitted with a cap.
X
Press button # on the key.
i
For replacing the transmitter battery
(Y page 171).
X
Remove cap : from lock cylinder ;.
X
Unlock the driver’s door.
The driver’s door and the charge socket
flap are unlocked.
i
To unlock the vehicle centrally press
the central unlocking switch in the upper
center console (Y page 25).
Locking the vehicle
If you can no longer lock the vehicle using
the remote control and you do not have a
spare transmitter battery at hand, please
proceed as follows:
X
Open the driver’s door.
X
Press the central locking switch
(Y page 51).
The indicator lamp on the central
locking switch comes on, when the starter
switch is in position 1.
The indicator lamp on the central
locking switch flashes, when the starter
switch is in position 0.
X
Remove the key from the starter switch,
take it with you, and close all doors.
The vehicle is now locked.
170
Unlocking/locking manually
>> Practical hints.