CHAPTER 3
USING APPS ON THE DISPLAY
36 smarttech.com/kb/171166
Pressing the Clean Up button doesn’t delete bookmarks saved in the Browser app. See
Using Browser on the previous page
Use the browser as you would on your computer or mobile device. Refer to the Help in the
browser.
Using Input
Connect a computer to the display to present content on the display. Download and
install SMARTsoftware on the connected computer to take full advantage of the
display’s touch and ink features.
NOTES
l Connecting a computer to the iQ appliance requires a recent version of the iQ appliance.
See the Identifying your iQ appliance model wizard.
l To connect a computer to the display’s connector panel, see Using SMART Learning Suite
on connected computers on page12.
l If you want to share content from a copyright-protected source (such as a Blu-ray™ player),
connect the device to the display’s connector panel. See Using SMART Learning Suite on
connected computers on page12.
Showing content on the display
To show content on the display
1. Make sure the input source is OPS/HDMI (see Using SMART Learning Suite on connected
computers on page12).
2. If an iQ appliance (AM30) is installed, connect a computer to the iQ appliance’s HDMI in and
USB receptacles.
If an iQ appliance (AM40) is installed, connect a device to the display’s HDMI 1, HDMI 2,
DisplayPort or VGA connectors.
NOTE
To enable touch control of the device, connect a USB cable to the corresponding USB port
for that video input port.
To Next Page
Loading...
Need help?
General
