Need help?Do you have a question about the Smartgen HAT700 and is the answer not in the manual?
General| Brand | Smartgen |
|---|---|
| Model | HAT700 |
| Category | Controller |
| Language | English |
Details ordering codes and nomenclature for ATS controllers.
Compares HAT700 series models based on functions.
Explains the function and meaning of LED indicators on the controller panel.
Describes the purpose and operation of each key button on the interface.
Details information presented on the controller's main LCD screen display.
Describes possible voltage status states for Source 1 (S1).
Describes possible voltage status states for Source 2 (S2).
Explains status conditions related to genset operation.
Details different states and transitions of ATS switch transfer.
Lists and describes warning alarms during operation.
Lists and describes fault alarms indicating critical failures.
Explains specific visual indications or messages shown on the display.
Covers miscellaneous other status items not categorized.
Details procedures for manually starting and stopping the genset.
Details how input ports trigger auto start/stop operations.
Describes start/stop for dual gensets (S1 and S2).
Explains scheduling automatic genset start and run times.
Details scheduling periods when the genset should not run.
Shows how to access and navigate parameter configuration.
Presents a detailed table of configurable parameters and their settings.
Details the function and purpose of each input port.
Details the function and purpose of each output port.
Explains custom logic for output signals based on conditions.
Details procedures for manual control of the ATS.
Explains how the ATS controller operates automatically.
Describes process and conditions for synchronized ATS source closing.
To Next Page
