Smartgen HAT700 User Manual

HAT700 SERIES ATS CONTROLLER USER MANUAL
HAT700 Series ATS Controller 2018-12-13 Version 1.5 Page 35 of 51
Action events are as follows:
No.
Action Events
Description
1
Closing S1
Record when the S1 close relay activated.
2
Closing S2
Record when the S2 close relay activated.
3
Opening
Record when the open relay (S1 Open or S2 Open) activated.
4
Sync Closing S1
Record when the S1 sync close relay activated.
5
Sync Closing S2
Record when the S2 sync close relay activated.
6
NEL1 Trip
Record when the NEL 1 Trip output.
7
NEL2 Trip
Record when the NEL 2 Trip output.
8
NEL3 Trip
Record when the NEL 3 Trip output.
9
Genset Start
Record when the Genset Start signal output.
10
S1 Genset Start
Record when the S1 Genset Start signal output.
11
S2 Genset Start
Record when the S2 Genset Start signal output.
12
Genset Stop
Record when the Genset Start signal deactivated.
13
S1 Genset Stop
Record when the S1 Genset Start signal deactivated.
14
S2 Genset Stop
Record when the S2 Genset Start signal deactivated.
15
Auto Mode
Record when the genset mode transferred to Auto Mode.
16
Manual Mode
Record when the genset mode transferred to Module Mode.

Smartgen HAT700 Specifications

General

Brand	Smartgen
Model	HAT700
Category	Controller
Language	English