SmartVent positive+ User Manual

13
System Operating Settings
Scheduler Settings
Setting the Scheduler is only necessary if you want HEAT TRANSFER or TEMPERING HEATER to operate for
predetermined times during each of the four periods available every 24 hours. Each period of time starts with the
scheduled start time for that period and ends at the start time for the next scheduled period.
Scheduler can be used with HEAT TRANSFER and TEMPERING HEATER seasonal upgrades and the period time
settings are common to both if installed. VENTILATION and TEMPERING HEATER functions will be disabled if HEAT
TRANSFER is operating.
- On the Home Screen, press SETTINGS
for 3 seconds then press HOME to enter Scheduler Settings and
follow the guide below to complete
NOTE: Settings shown are examples only
- Press HOME
at any stage to exit Scheduler Settings and return to the Home Screen
- Press SETTINGS
at any stage to return to the previous screen
Period 1 Period 2 Period 3 Period 4
Go to
MINUTE
value
Select
MINUTE
value
Go to
PERIOD 2
Select
HOUR
value
Go to
MINUTE
value
Select
MINUTE
value
Go to
PERIOD 3
Select
HOUR
value
Go to
MINUTE
value
Select
MINUTE
value
Go to
PERIOD 4
Select
HOUR
value
Go to
MINUTE
value
Select
MINUTE
value
Go to
Home
Screen
Select
HOUR
value
Confirm
HOUR
value
Confirm all
PERIOD 1
settings
Confirm
HOUR
value
Confirm all
PERIOD 2
settings
Confirm
HOUR
value
Confirm all
PERIOD 3
settings
Confirm
HOUR
value
Save all
PERIOD 1-4
settings

SmartVent positive+ Specifications

General

Brand	SmartVent
Model	positive+
Category	Fan
Language	English