7
Modes
Manual (MAN) Operation and System Fan Speed and Air Source Settings
Your SmartVent Positive+ system allows manual control of the fan speed and air source if required. Fan speed
will remain constant at the speed set.
- On the Home Screen, press SETTINGS
and then UP , or DOWN , to toggle to VENTILATION mode
- Press SELECT
to enter VENTILATION mode and then UP
, or DOWN
, to toggle to MAN operation and
follow the guide below to complete the setting of the system fan speed and the selection of the air source.
- Alternately, if already in ON and on the Home Screen, press SELECT
to toggle to MAN operation and
follow the same guide below to change the system fan speed.
Go to
AIR SOURCE
value
Confirm
FAN SPEED
value
Select
FAN SPEED
value
Go to
FAN SPEED
value
Confirm
MAN
operation
Select
AIR SOURCE
value
Go to
Home
Screen
Save all
settings