SmartVent positive+ User Manual

16
CODE DESCRIPTION ACTION
E030
Communication error between the
touch screen controller and the
ceiling controller
Ensure the connection between the touch screen controller
and the ceiling controller is correct and secure, and that the
cable is not damaged
0001 Clock error Change the time on the touch screen controller
1180 Roof cavity sensor com failure
Ensure the connection between the sensor and the ceiling
controller is secure, and that the cable is not damaged
1280 Lounge sensor com failure
1x80 Wrong port connection Reboot the ceiling controller
Filter change required
Replace filter and reset filter by changing Advanced Setting
019 to 10 and pressing SELECT to confirm
Troubleshooting
An ALERT icon and an error code will appear on the Home Screen when there
is an electronic fault in the system.
If there are multiple faults the error codes will cycle to the next code periodically.
Contact SmartVent for assistance if error codes not listed above appear or the
actions above do not clear the errors.

SmartVent positive+ Specifications

General

Brand	SmartVent
Model	positive+
Category	Fan
Language	English