SmartVent positive+ User Manual

9
Heat Transfer
When HEAT TRANSFER is ON, the fan speed will be low when the lounge temperature exceeds the SET
temperature, and it will gradually speed up as your lounge gets warmer.
HEAT TRANSFER mode has priority over VENTILATION mode. To ensure your home stays regularly ventilated, we
recommend you use the timer function to turn HEAT TRANSFER OFF during the day, the middle of the night and
early morning. We also recommend HEAT TRANSFER is set to ON in the evening.
OFF Mode
HEAT TRANSFER mode is OFF.
- On the Home Screen, press SETTINGS
and then UP , or DOWN , to toggle to HEAT TRANSFER mode
- Press SELECT
to enter HEAT TRANSFER mode
- Press UP
, or DOWN , to toggle to OFF and press SELECT to save
ON Mode and Temperature (TEMP) Setting
HEAT TRANSFER starts when the lounge temperature is higher than the temperature you choose. SET is the
minimum temperature you want in your lounge before your system commences transferring heat. The SmartVent
Positive+ touch screen controller, with a built-in thermostat, must be located in the heat source room for it to be
effective.
- On the Home Screen, press SETTINGS
and then UP , or DOWN , to toggle to HEAT TRANSFER mode
- Press SELECT
to enter HEAT TRANSFER mode
- Press UP
, or DOWN , to toggle to ON and follow the guide below to complete
SCHEDULER Mode
HEAT TRANSFER can be set to work to a schedule which enables you to make the most of your HEAT TRANSFER
feature. We recommend you use the timer function to turn HEAT TRANSFER OFF during the day, the middle of the
night and early morning. We also recommend HEAT TRANSFER is set to ON in the evening.
See Scheduler Settings for detail on how to set up the scheduled times on pages 11 and 12.
Confirm
ON
setting
Select
TEMP
value
Go to
TEMP
value
Save all
settings
Go to
Home
Screen

SmartVent positive+ Specifications

General

Brand	SmartVent
Model	positive+
Category	Fan
Language	English