To Next Page
A
Ashley CohenAug 12, 2025
Why does my house feel colder with the SmartVent Fan system installed?
- JJose AguilarAug 12, 2025
If your SmartVent Fan system makes your house feel colder, verify the set temperature value within the VENTILATION settings.
Why does my house feel colder with the SmartVent Fan system installed?
If your SmartVent Fan system makes your house feel colder, verify the set temperature value within the VENTILATION settings.
What to do if there is condensation forming on my windows with SmartVent Positive2 Fan?
If you notice condensation forming on your windows, ensure that the VENTILATION mode on your SmartVent Fan is set to AUTO.
What to do if there is no air coming out my diffusers in SmartVent Fan?
If no air is coming out of your diffusers, ensure that the touch screen controller for your SmartVent Fan is powered ON.
How to reset filter on SmartVent Fan?
To address the 'Filter change required' message on your SmartVent Fan, replace the filter. Then, reset the filter by changing Advanced Setting 016 to 10 and pressing SELECT to confirm.
Why is the scheduler not switching at the right time on my SmartVent Positive2?
If the SmartVent Fan scheduler isn't switching at the correct time, note that the system may have up to a 5 minute delay between switching states.
How to fix SmartVent Positive2 Fan error E030?
If you are getting an E030 error on your SmartVent Fan, ensure the connection between the touch screen controller and the ceiling controller is correct and secure, and that the cable is not damaged.
How to fix SmartVent Fan error 1138?
If you are getting a 1138 error on your SmartVent Fan, ensure the connection between the sensor and the ceiling controller is secure, and that the cable is not damaged.
How to fix SmartVent Positive2 Fan error 0001?
If you are getting a 0001 error on your SmartVent Fan, change the time on the touch screen controller.
Explains the SmartVent Positive2 as a positive pressure system using roof cavity air.
Details Summer Feature, Heat Transfer, and Tempering Heaters as system enhancements.
Instructions on how to power on the SmartVent system.
Guide to setting the hour, minutes, day, year, month, and date.
Details how to set the ventilation mode (MAN/AUTO) and desired indoor temperature.
Instructions on activating and exiting Boost Mode for maximum fan speed.
Details on how to lock and unlock the controller keypad.
Information on the ALERT indicator and where to find error codes.
Explanation of buttons used for navigating and adjusting settings.
Flowchart for navigating and changing ventilation mode and fan speed settings.
Flowchart for configuring Heat Transfer mode settings.
Flowchart for configuring Tempering Heater mode settings.
Flowchart for configuring Recycle mode settings.
Steps for selecting and changing ventilation mode settings.
Procedure for saving configuration changes and returning to the Home Page.
Guide to setting up the day scheduler for heat transfer and heater modes.
Explanation of how AUTO mode automatically controls ventilation based on temperature.
Details on how MANUAL mode allows manual control of fan speed and air source.
How Heat Transfer operates when the lounge temperature exceeds the set point.
System operates in VENTILATION mode when Heat Transfer is OFF.
Using the scheduler to manage Heat Transfer feature for cost reduction.
Indicates when the Tempering Heater is turned off.
Explains when the Tempering Heater turns on based on fresh air temperature.
Using the scheduler to manage Tempering Heater for reduced running costs.
Procedure for setting the current hour on the controller.
Guide to setting the day, month, and year on the controller.
Instructions for setting the start times for the four schedule periods.
How the Recycle feature limits air entry based on roof temperature.
Steps to enter and navigate through the advanced settings menu.
Details on the range, default values, and notes for advanced settings.
Important notes on Recycle mode, temperature calibration, and filter reset.
Instructions for replacing the filter and resetting the filter timer.
Steps to resolve condensation forming on windows.
Troubleshooting steps for no airflow from diffusers.
Explanation for why the house might feel colder with the system.
Understanding why the house might feel too hot.
Resolving the FILT alert after changing the filter.
Troubleshooting scheduler not switching at the correct time.
List of error codes, their descriptions, and recommended actions.
General
