19
Heat Transfer (cont’d)
SCHEDULER Mode
HEAT TRANSFER
can be set to work to a schedule, use this function to
make the most of your HEAT TRANSFER feature. We recommend you use
the timer function to turn HEAT TRANSFER OFF during the day, the middle of
the night and early morning. We also recommend HEAT TRANSFER is set to
ON in the evening.
OFF Mode
HEAT TRANSFER
is always OFF. System is in VENTILATION mode.
ON Mode
HEAT TRANSFER
operates relative to the set temperature (ie. when the
heated room reaches the set temperature, heat transfer will commence
1)
).
See Scheduler Time Setting section for detail on how to set up the scheduler
times on Page 24.
1) The SmartVent Positive2 wall controller has a built-in thermostat. It must be located in the heat source room to be effective.
MENUMENU
To Next Page
Loading...
Need help?
General
