Need help?Do you have a question about the SmartVent Synergy2 SYN190E2 and is the answer not in the manual?
General| Model | SYN190E2 |
|---|---|
| Type | Energy Recovery Ventilator (ERV) |
| Airflow | 20-190 CFM |
| Noise Level | 28-56 dBA |
| Voltage | 120V AC |
| Category | Fan |
Explains the fundamental operation of the SmartVent Synergy2 system.
Details additional features like Second Air Source, Heat Transfer, and Core Bypass.
Steps to power on the SmartVent Synergy2 system.
Procedure to unlock the touchscreen interface for operation.
Instructions for configuring the system's date and time settings.
Guide to setting the ventilation mode to AUTO and desired indoor temperature.
Overview of the initial standby and main home control screens.
Introduction to the menu for accessing system configurations.
Interface for adjusting the system's date and time.
Screen for monitoring and resetting filter usage timers.
Controls for screen brightness, auto lock time, and screen lock.
Options for configuring ventilation modes, source, and fan speed.
Explains icons for indoor/outdoor temperatures and dew point.
Details icons for AUTO, TIMER, and MANUAL ventilation modes.
Describes icons for fan speed, booster, lock, settings, and standby.
Step-by-step guide to setting the system's date and time.
Instructions for checking and resetting filter life indicators.
Configuration of screen brightness and auto lock settings.
System automatically selects air source and fan speed based on conditions.
Schedule ventilation settings for specific times and days.
Manual control of fan speed and air source selection.
Disables Heat Transfer mode, reverting to Ventilation mode.
Heat Transfer activates when lounge temp exceeds set point.
Schedule Heat Transfer operations for specific times and days.
Disables the tempering heater function.
Heater activates when fresh air temperature is below the set point.
Schedule tempering heater operations for specific times and days.
Feature to bypass the recovery core for cooler fresh air intake.
Limits damp fresh air intake when indoor air is damper.
Guide to replacing and resetting F7 and HEPA filters.
Instructions for cleaning the G3 filters in the heat exchanger.
Annual procedure for cleaning the heat exchanger core.
Solutions for unresponsive touchscreen inputs and airflow problems.
Troubleshooting for house temperature and filter indicator issues.
Lists common error codes and their corresponding actions.
Definitions of key terms used throughout the manual.
Detailed technical data and compliance information for the system.
To Next Page
