34
Error Codes
Error codes will appear on the HOME page when there is an electronic fault in
the system. If there are multiple faults the error codes will cycle to the next code
every 5 seconds.
Code Description Actions
E0000
Communication Error Between
TSC and Ceiling Controller
Ensure connection between
touchscreen controller and ceiling
controller is correct and secure,
and cable is not damaged.
E0001 Clock Error Change the time on the TSC.
E1080 Outside Sensor Com Failure
Ensure connection between
sensor and ceiling controller
is secure, and cable is not
damaged.
E1180 Roof Sensor Com Failure
E1280 Lounge Sensor Com Failure
E1380 Bedroom Sensor Com Failure
Contact SmartVent for support on 0800 140 150 if you see error codes not listed
above or the actions above do not clear the errors.
To Next Page
Loading...
Need help?
General
