SmartVent Synergy2 SYN190E2 User Manual

7
Your standard SmartVent Synergy2 ventilation system is now set up and ready to
operate.
For further instruction on how to set up Heat Transfer, go to page 18, or for
Tempering Heater set up, go to page 21.
If your system has a Summer Feature installed your SmartVent Synergy2
controller will automatically select the best quality air from either the roof cavity,
or the outside.
Quick Setup Guide (cont’d)
4 - Set Ventilation Mode and Temperature
- From the home screen press the settings icon
.
- Select the the VENTILATION icon
.
- Select AUTO ventilation mode.
- Press and scroll through the temperature options select your preferred
indoor temperature.
- Press the tick to
confirm.
- Press the save icon
to save your changes.
- Press the home icon
to return to the home screen.
VENTILATION HEAT TRANSFER HEATER
VENTILATION MODE
TEMP
MANTIMERAUTO
22°C
22
23
21

SmartVent Synergy2 SYN190E2 Specifications

General

Brand	SmartVent
Model	Synergy2 SYN190E2
Category	Fan
Language	English