13
Save Changes
Adjust
Vent Parameters
1) Some settings are only available if the relevant kits are installed and advanced settings have been enabled.
1 From the Home Page press SETTINGS to go to mode settings selection.
2. Press UP or DOWN to choose the mode settings you want to change
1).
3. Press SELECT to enter into the chosen mode settings.
4. Use UP and DOWN to change the settings.
5. Press SELECT again to move onto the next setting of the chosen mode
1)
.
6. Press SELECT on final mode setting to save the changes and return to
the Home Page.
7. Press SETTINGS to go back to the previous setting.
8. Press HOME
to discard changes and return to the Home Page.
MENU
To Next Page
Loading...
