Troubleshooting
PROBLEM CAUSE REMEDY
Motor is not
responding
Remote battery has been
completely discharged
Battery is inserted incorrectly
Radio interference / Shielding
Replace battery with new 1.5V - Battery
Check battery positioning
Ensure remote is positioned away from metal
objects and that antenna on motor or receiver is
kept straight and away from metal.
Move remote to a closer position.Receiver distance is too far
from remote
Power failure Check power supply to motor is connected and
active.
Cannot adjust limits on
a single motor
(multiple motors
respond)
Multiple motors are grouped
onto one channel.
Disconnect power to other motors or put them in
sleep mode.
Moto is no g
To Next Page
Loading...