Mirroring Remotes
Each battery motor will come preprogramed from Smartwings .
The preprograming ensures the remote is paired with the motor, the upper and lower operation limits
are set, the remote is unlocked.
Follow the below steps to copy settings from an existing remote to a new remote.
2. ADD OR REMOVE REMOTE USING AN EXISTING REMOTE
1
Press P (1sec)
EXISTING
2
Press P (1sec)
EXISTING
3
Press P (1sec)
NEW
(To be Added or Removed)
Note: Select channel on existing remote to be copied
Select channel on new remote where existing channel will be copied
Note: the motor jogs once
Note: the motor jogs twice
Note: the motor jogs once
Press any
button to
wake remote
Within 10sec Press
select desired
channel.
1a
1b
1. SELECT CHANNEL
" "
or " " to
To Next Page
Loading...