Each battery motor will come preprogramed from Smartwings Upon leaving the factory the
motor
is
placed into “Sleep Mode” to avoid accidental operation during shipping. It is necessary to “Wake”
the
motor before operation and setup.
Sleep Mode
To “Wake” the motor and exit Sleep Mode, assure the motor is installed and secured in the
mounting hardware.
Once installed safely and securely, press and hold the programming button on the motor head
until the motor jogs once. It is now no longer in “Sleep Mode” and ready for further setup.
Warning:
• Shade - if you press and release the programming button quickly, the motor will operate to its
limit.
•
If required, to place the motor back into “Sleep Mode” press and hold the programming button
for a period of 10 seconds. Release the button when the motor has jogged
three times. The
“
Sleep Mode” has been activated.
Exit Sleep Mode
Enter Sleep Mode
To Next Page
Loading...