SMC Networks 7004ABR - Barricade Configuration; Web Console Login and Initial Setup

21
Conguring Your Barricade
Now that you have successfully congured your computer and
retrieved your new network settings from your Barricade, you are
ready to congure the Barricade’s settings for your LAN.
1. Open your Web browser
(i.e., Internet Explorer or Netscape
Navigator) and click the stop button.
2. In the “Address” eld type
“http://192.168.2.1” and press
<ENTER>.
3. The Barricade login screen will
appear. Leave the Password eld
empty and click on “login”. There is
no password by default. For security
reasons, you should assign a
password as soon as possible.
Note that the password login in
case sensitive.
4. On the main page of the Barricade
Web console, click “Setup.”
5. The Barricade’s automated setup
process will take you through each
step for setting up your Barricade.
Click “Enter” to start the process.