C
ONFIGURING
THE
B
ARRICADE
4-4
Setup Wizard
Channel and SSID
Click on “Setup Wizard” and “NEXT”, then you will see the Channel and
SSID page.
Click “NEXT” to continue.
Parameter Description
ESSID Extended Service Set ID. The ESSID must be the same on the
Barricade and all of its wireless clients.
ESSID Broadcast Enable or disable the broadcasting of the SSID.
Wireless Mode This device supports both 11g and 11b wireless networks. Make
your selection depending on the type of wireless network that
you have.
Channel The radio channel used by the wireless router and its clients to
communicate with each other. This channel must be the same
on the Barricade and all of its wireless clients.
The Barricade will automatically assign itself a radio channel, or
you may select one manually.
To Next Page
Loading...
Need help?
General
