S
ETUP
W
IZARD
4-9
Parameter Setting - Country or ISP Not Listed
If your Country or Internet Service Provider is not listed select “Other ISP
Services”. This will allow you to manually configure your ISP settings.
For manual configuration you will need to know the Protocol, DNS
Server, Encapsulation and VPI/VCI settings used by your ISP. If you have
a Static IP address you will also need to know the IP address, Subnet Mask
and Gateway address. Please contact your ISP for these details if you do
not already have them.
After selecting “Other ISP Services” you will be required to select what
Protocol your ISP uses from the “Internet Service Provider” drop down
list.
To Next Page
Loading...
Need help?
General
