A
DVANCED
S
ETUP
4-43
ROUTING
These pages define routing related parameters, including static routes and
RIP (Routing Information Protocol) parameters.
Static Route
Click “Add” to add a new static route to the list, or check the box of an
already entered route and click “Modify”. Clicking “Delete” will remove an
entry from the list.
Parameter Description
Index Check the box of the route you wish to delete or modify.
Network Address Enter the IP address of the remote computer for which
to set a static route.
Subnet Mask Enter the subnet mask of the remote network for which
to set a static route.
Gateway Enter the WAN IP address of the gateway to the remote
network.
To Next Page
Loading...
Need help?
General
