A
DVANCED
S
ETUP
4-27
PPPoE
Parameter Description
IP Address Enter the IP address provided by your ISP.
Subnet Mask Enter the subnet mask address provided by your
ISP.
VPI/VCI Enter the Virtual Path Identifier (VPI) and Virtual
Circuit Identifier (VCI) supplied by your ISP.
Encapsulation Select the encapsulation used by ISP from the drop
down list.
QoS Class ATM QoS classes including CBR, UBR and VBR
PCR/SCR/MBS QoS Parameters - PCR, SCR and MBS are
configurable.
Connect Type Sets connection mode to always connected,
automatic or manual connection.
Idle Time (Minute) Enter the maximum idle time for the Internet
connection. After this time has been exceeded the
connection will be terminated.
Username Enter user name.
Password Enter password.
Confirm Password Confirm password
MTU Leave the Maximum Transmission Unit (MTU) at
the default value (1500) unless you have a
particular reason to change it.
To Next Page
Loading...
Need help?
General
