EasyManuals Logo

SMC Networks Barricade SMC7904WBRA User Manual

SMC Networks Barricade SMC7904WBRA
139 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #78 background imageLoading...
Page #78 background image
C
ONFIGURING
THE
B
ARRICADE
4-34
WEP
If you want to use WEP to protect your wireless network, you need to set
the same parameters for the Barricade and all your wireless clients.
You may automatically generate encryption keys or manually enter the
keys. To generate the key automatically with passphrase, check the
Passphrase box, enter a string of characters. Select the default key from the
drop down menu. Click “SAVE SETTINGS”.
Note: The passphrase can consist of up to 32 alphanumeric characters.
To manually configure the encryption key, enter five hexadecimal pairs of
digits for each 64-bit key, or enter 13 pairs for the single 128-bit key.
(A hexadecimal digit is a number or letter in the range 0-9 or A-F.)
Parameter
Description
WEP Mode Select 64 bit or 128 bit key to use for encryption.
Key Entry Method Select Hex or ASCII to use for encryption key
Key Provisioning Select Static if there is only one fixed key for encryption. If
you want to select Dynamic, you would need to enable
802.1X function first.

Table of Contents

Other manuals for SMC Networks Barricade SMC7904WBRA

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SMC Networks Barricade SMC7904WBRA and is the answer not in the manual?

SMC Networks Barricade SMC7904WBRA Specifications

General IconGeneral
BrandSMC Networks
ModelBarricade SMC7904WBRA
CategoryWireless Router
LanguageEnglish

Related product manuals