-27-
No.EX##-OMN0036
•EX600-DX E /EX600-DX F
Display Content
ST LED is OFF
The power supply for control and input is OFF.
Green LED is ON
The product is operating normally.
Red LED is ON
The power supply of input device has a short circuit.
(Each of input 0 to 15)
Red LED is flashing
The input device ON/OFF count has exceeded the set value.
(Each of input 0 to 15)
“0 to 15” LEDs are OFF
The input device is OFF.
(Each LED display number corresponds to input 0 to 15.)
“0 to 15” green LEDs are ON
The input device is ON.
(Each LED display number corresponds to input 0 to 15.)
∗: Refer to troubleshooting (SI unit Operation Manual of protocol used) for the further details of countermeasures.
To Next Page
Loading...
