25
For M12
For 7/8 inch
How to Order
End plate
End plate mounting position: U side
E U 1EX600 2
Specifi cations
Symbol
Specifi cations
1
Waterproof cover
End Plate (U side)
AYEX600
Analogue output
Number of output channels and connector
AMEX600
Analogue input/output
Number of input/output channels and connector
Symbol
Number of input channels Number of output channels
Connector
B
2 channels 2 channels
M12 connector (5 pins)
4 pcs.
Symbol
Number of output channels
Connector
A
2 channels M12 connector (5 pins) 2 pcs.
A
B
Analogue Output Unit
∗
1
Analogue Input/Output
Unit
∗
1
∗1 For specifi cations, refer to the Fieldbus system EX600 series in the catalogue on www.smc.eu.
∗1 The pin layout for “4” and “5” pin connector
is different.
Refer to the dimensions on page 32.
End plate
End plate mounting position: D side
E DEX600 2 2
Power supply connector
Symbol
Power supply connector
Specifi cations
2
M12 (5 pins) B-coded IN
3
7/8 inch (5 pins) IN
4
M12 (4/5 pins) A-coded
∗
1
IN/OUT
5
M12 (4/5 pins) A-coded
∗
1
IN/OUT
Mounting method
Symbol
Description Note
—
Without DIN rail mounting bracket
—
2
With DIN rail mounting bracket
For SV, S0700, VQC series
3
With DIN rail mounting bracket
For SY series
∗ When the end plate (U side) is used, the symbol for the
mounting method must be the same as the D side.
End Plate (D side)
Mounting method
Symbol Description Note
—
Without DIN rail mounting bracket
—
2
With DIN rail mounting bracket
For EX600-ED-2
3
With DIN rail mounting bracket
For EX600-ED-3
∗ When the end plate (D side) is used, the symbol for the
mounting method must be the same as the U side.
NFC Reader/Writer
EXW1 NT1
∗ Order a fi xing bracket.
∗ A USB cable (3 m) is also included.
Fixing bracket (Option)
EXW1-AB 1
Variations
Symbol
Description
Appearance
Single unit Product mounting view
1
For
EX600-W
When only optional parts are required, order with the part number below.
EX600-W Series
To Next Page
Loading...
