SMC Networks EXW1 Series - End Plate Bracket; Valve Plate

37
r
r
t
!3
t
q
y
i
u
!1
!2
w
e
o
!0
EX600-ZMV1
(For the SV, S0700, and VQC
series)
EX600-ZMA3
(For the SY and JSY series)
EX600-ZMV2
(For the SY and JSY series)
EX600-W Series
Accessories (Optional Parts)
EX600-ZMA2
(For the SV, S0700, and VQC series)
This bracket is used for the end plate of DIN rail mounting.
Enclosed parts
Round head screw (M4 x 20) 1 pc.
P-tight screw (4 x 14) 2 pcs.
Enclosed parts
Round head screw with washer (M4 x 20) 1 pc.
P-tight screw (4 x 14) 2 pcs.
Enclosed parts
Round head screw (M4 x 6) 2 pcs.
Round head screw (M3 x 8) 4 pcs.
Enclosed parts
Round head screw (M4 x 6) 2 pcs.
Round head screw (M3 x 8) 2 pcs.
q End Plate Bracket
w Valve Plate
Power Supply Field-wireable
Connector (7/8 inch)
End Plate Bracket
Reinforcing Brace
(For DIN rail mounting)
End Plate (U side)
(When the valve manifold
is not in use)
Reinforcing Brace
(For direct mounting)
Seal Cap
(M12)
Valve Plate
(When the valve
manifold is in use)
Marker
Power Supply
Cable
(7/8 inch
connector,
For EX600-ED3)
I/O Cable with
Connector
Seal Cap
(M8)
Communication Cable
Field-wireable Communication
Connector
Power Supply Cable (M12 connector, For EX600-ED2)
Power Supply Cable (M12 connector, For EX600-ED4/5)