SMC Networks EXW1 Series - Page 37

36
Wireless System
Modular Type
EX600-W Series
LED Display
Remote module
No. LED name Function Color of LED Operation
1 PWR (V)
Power supply
voltage for
output (US2)
Green LED is ON. Power supply voltage for output (US2) is normal.
Red LED
fl ashes.
Power supply voltage for output (US2) is abnormal.
(Indication only. The product can be operated. Applicable when
the output power supply voltage monitoring setting is enabled)
OFF Power supply for control and input (US1) is not supplied.
2 W-SS
Radio wave
receiving intensity
(For communication
from base to
remote)
Green LED is ON. The received power level is 3.
Green LED fl ashes. (1 Hz) The received power level is 2.
Green LED fl ashes. (2 Hz) The received power level is 1.
Red LED fl ashes. Wireless communication is not connected.
OFF The base module is not registered.
3 W-NS
Wireless
communication
connection
status
Green LED is ON Remote is connected correctly.
Red LED fl ashes. No remotes are connected.
Red LED is ON. No remotes are connected. (Non-restorable error in wireless communication)
Red/Green Wireless communication connection is under construction. (Pairing)
Orange LED is ON. Forced output mode
OFF The base module is not registered.
4 MS
Remote module
system status
Green LED is ON. Remote module is normal.
Red LED
fl ashes.
Restorable error is detected. (LED fl ashes when one
diagnostic information item or more is detected.)
·
Abnormal power supply voltage level for control and input
(Applicable when the control and input power supply
voltage monitoring setting is enabled)
·
Excessive I/O setting inputs/outputs
·
Analogue I/O upper set limit exceeded
·
Analogue input range upper and lower limit exceeded
·
Error in communication between units
·
EX600 I/O unit detects diagnostic information
·
Valve diagnostic information detected
Red LED is ON. Non-restorable error is detected. (e.g. Hardware failure)
OFF Power supply for control and input (US1) is not supplied.
q
w
r
e