29
Specifi cations
Remote Module: EX600-WSV
Item Specifi cations
Electrical
For control/input
(US1)
Power supply voltage 24 VDC ±10 %
Current consumption 70 mA or less
For output
(US2)
Power supply voltage 24 VDC ±10 %
Max. supply current 4 A
Input/Output
Number of inputs
Input size Max. 128 points (increase or decrease by 16 points)
Number of outputs
Output size Max. 128 points (increase or decrease by 16 points)
AD/DA refresh time 0.1/0.2/0.5/1/2/5/10/30/60 s
∗
1
Number of connected EX600 I/O units Max. 9 EX600 I/O units (I/O = 128. I/O above 128 cannot be recognized.)
Valve output
Output type
EX600-WSV1: Source/PNP (−COM)
EX600-WSV2: Sink/NPN (+COM)
Number of outputs Max. 32 points (0/8/16/24/32 points)
Connected load
Solenoid valve with surge voltage suppressor of 24 VDC and 1.5 W or less (manufactured by SMC)
Wireless
communication
Protocol SMC original protocol (SMC encryption) V.1.0
Radio wave type (spread) Frequency Hopping Spread Spectrum (FHSS)
Frequency 2.4 GHz (2403 to 2481 MHz)
Number of frequency channels 79 ch (Bandwidth: 1.0 MHz)
Communication speed 250 kbps
Communication distance 10 m (Depending on the operating environment)
Radio Law certifi cate
Refer to the SMC website www.smc.eu for the latest information regarding in which
countries the product is certifi ed.
General
Enclosure Conforms to IP67 (with manifold assembled)
Ambient temperature (Operating temperature)
−10 to +50 °C
Ambient temperature (Storage temperature)
−20 to +60 °C
Ambient humidity 35 to 85 % RH (No condensation)
Withstand voltage 500 VAC for 1 minute between external terminals and metallic parts
Insulation resistance 10 MΩ or more (500 VDC between external terminals and metallic parts)
Vibration resistance
Conforms to EN 61131-2
5 ≤ f < 8.4 Hz 3.5 mm
8.4 ≤ f < 150 Hz 9.8 m/s
2
(Excludes valve manifold)
Impact resistance
Conforms to EN 61131-2
147 m/s
2
, 11 ms
(Excludes valve manifold)
Standards CE marking
Weight 280 g
NFC
communication
∗
2
Communication standard ISO/IEC 14443B (Type-B)
Frequency 13.56 MHz
Communication speed 20 to 100 kHz (I2C)
Communication distance Up to 1 cm
∗
1 Varies depending on the wireless communication status and the surrounding environment
∗
2 The NFC communication RFID tag of the 13.56 MHz passive type
End Plate (D side)
Model
EX600-ED2- EX600-ED3- EX600-ED4/5-
Electrical
Power supply
connector
PWR IN M12 (5-pin) plug 7/8 inch (5-pin) plug M12 (4-pin) plug
PWR OUT — — M12 (5-pin) socket
Rated
voltage
Power supply for control/input
24 VDC ±10 %
Power supply for output 24 VDC +10/−5 %
Rated
current
Power supply for control/input
Max. 2 A Max. 8 A Max. 4 A
Power supply for output
Enclosure IP67 (with manifold assembled)
Standards
∗
1
CE marking (EMC directive/RoHS directive), UL (CSA)
Weight 170 g 175 g 170 g
∗1 The EX600-ED4/5- is not compliant with UL (CSA) standards.
EX600-W Series
To Next Page
Loading...
