27
EX600-W Series
Specifi cations
Trademark
EtherNet/IP
®
is a registered trademark of ODVA. Inc.
Base Module: EX600-WEN
Item Specifi cations
EtherNet/IP™
communication
Communication protocol EtherNet/IP™ (Conformance test version: Composit 12)
Transmission medium (cable) Standard Ethernet cable (CAT5 or higher, 100BASE-TX)
Communication speed 10 Mbps/100 Mbps
Communication method Full duplex/Half duplex
Confi guration fi le EDS fi le
∗
1
IP address setting Manual/BOOTP, DHCP
Device information
Vendor ID: 7 (SMC Corp.)
Device type: 12 (Communication Adaptor)
Product code: 186
Topology Star, Bus, Ring (DLR), Line, Tree
QuickConnect™ function Applicable
DLR function Applicable
Web server function Applicable
Wireless
communication
Protocol SMC original protocol (SMC encryption) V.1.0
Radio wave type (spread) Frequency Hopping Spread Spectrum (FHSS)
Frequency 2.4 GHz (2403 to 2481 MHz)
Number of frequency channels 79 ch (Bandwidth: 1.0 MHz)
Communication speed 250 kbps
Communication distance 10 m (Depending on the operating environment)
Radio Law certifi cate
Refer to the SMC website www.smc.eu for the latest information regarding in which
countries the product is certifi ed.
Electrical
For control/input
(US1)
Power supply voltage 24 VDC ±10 %
Current consumption 150 mA or less
For output
(US2)
Power supply voltage 24 VDC ±10 %
Max. supply current 4 A
Input/Output
Number of
inputs
System input size Max. 1280 points together with the registered remote modules
Input size Max. 128 points (increase or decrease by 16 points)
Number of
outputs
System output size Max. 1280 points together with the registered remote modules
Output size Max. 128 points (increase or decrease by 16 points)
Analogue
input/output
AD refresh time
10 ms or less (the input connected to the base module)
0.1/0.2/0.5/1/2/5/10/30/60 s
(the input connected to the remote module)
∗
2
DA refresh time
10 ms or less (the output connected to the base module)
0.1/0.2/0.5/1/2/5/10/30/60 s
(the output connected to the remote module)
∗
2
Valve output
Output type
EX600-WEN1: Source/PNP (−COM)
EX600-WEN2: Sink/NPN (+COM)
Number of outputs Max. 32 points (0/8/16/24/32 points)
Connected load
Solenoid valve with surge voltage suppressor of 24 VDC and 1.5 W or less (manufactured by SMC)
Number of remote modules connected Max. 127 units (0/15/31/63/127 units)
Number of connected EX600 I/O units Max. 9 EX600 series I/O units (I/O = 128. I/O above 128 cannot be recognized.)
General
Enclosure Conforms to IP67 (with manifold assembled)
Ambient temperature (Operating temperature)
−10 to +50 °C
Ambient temperature (Storage temperature)
−20 to +60 °C
Ambient humidity 35 to 85 % RH (No condensation)
Withstand voltage 500 VAC for 1 minute between external terminals and metallic parts
Insulation resistance 10 MΩ or more (500 VDC between external terminals and metallic parts)
Vibration resistance
Conforms to EN 61131-2
5 ≤ f < 8.4 Hz 3.5 mm
8.4 ≤ f < 150 Hz 9.8 m/s
2
(Excludes valve manifold)
Impact resistance
Conforms to EN 61131-2
147 m/s
2
, 11 ms
(Excludes valve manifold)
Standards CE marking
Weight 300 g
NFC
communication
∗
3
Communication standard ISO/IEC 14443B (Type-B)
Frequency 13.56 MHz
Communication speed 20 to 100 kHz (I2C)
Communication distance Up to 1 cm
∗1 The confi guration fi le can be downloaded from the SMC website: www.smc.eu
∗2 Varies depending on the wireless communication status and the surrounding environment
∗3 The NFC communication RFID tag of the 13.56 MHz passive type
To Next Page
Loading...
