38
106
90
4.6
8
20.5
2628.2
56.6
13.2
6.7
4.1
18.213
9.1
This bracket is used on the bottom of the unit at the intermediate position for connecting 6 units or more.
∗ Be sure to attach this bracket to prevent connection failure between the units caused by defl ection.
For direct mounting
EX600-ZMB1
For DIN rail mounting
EX600-ZMB2
Enclosed parts
Round head screw (M4 x 5) 2 pcs.
Enclosed parts
Round head screw (M4 x 6) 2 pcs.
r Reinforcing Brace
EX9-AWES
For M8
EX9-AWTS
For M12
Be sure to mount a seal cap on any unused I/O connectors.
Otherwise, the specifi ed enclosure cannot be maintained.
The signal name of I/O device and each unit address can be
entered and mounted on each unit.
EX600-ZT1
y Marker (1 sheet, 88 pcs.)t Seal Cap (10 pcs.)
The end plate is for use when the manifold valve is not connected.
Enclosed parts
Round head screw (M4 x 6) 2 pcs.
e End Plate (U side)
End plate
End plate mounting position: U side
Mounting method
Symbol
Description Note
—
Without DIN rail mounting bracket
—
2
With DIN rail mounting bracket For EX600-ED-2
3
With DIN rail mounting bracket For EX600-ED-3
∗ Select in accordance with the symbol for
the end plate (D side) mounting method.
Specifi cation
Symbol Specifi cation
1
Waterproof cover
EX600-EU1
EX600-
E
U
1
-
2
Accessories EX600-W Series
2 x M4 direct mounting hole
SI unit mounting hole x 2
To Next Page
Loading...
