Need help?Do you have a question about the SMC Networks EX600 Series and is the answer not in the manual?
General| Brand | SMC Networks |
|---|---|
| Model | EX600 Series |
| Category | I/O Systems |
| Language | English |
Defines Caution, Warning, and Danger levels.
Precautions for disassembly, wet hands, specs.
Defines compatibility and training responsibilities.
Handling, assembly, maintenance precautions.
Precautions for dropping, tightening torque, mounting.
Precautions for setting switches and performing operations.
Precautions for bending, correct wiring, noise interference.
Precautions for power, air supply, and cleaning.
Precautions for protection type, water, chemicals, gases, surges.
How to mount the unit directly.
How to mount the unit on a DIN rail.
Connector pin assignments for IO-Link Master units.
Procedure for connecting cables.
Details on how to set the DIP switches.
Explains how to set the IP address using switches.
How to set IP address via server.
Continues the troubleshooting flow chart.
Continues troubleshooting methods.
How parameters are defined and set.
How diagnostic data is assigned based on switch settings.
Breakdown of diagnostic data bits and their meanings.
Diagnostic functions for IO-Link master unit ports.
Information on EDS files and icons for EX600 configuration.
Continues the Logix Designer setup.
Details on setting module properties in Logix Designer.
Configuration using a generic Ethernet module.
Using configuration assembly for parameter setting.
Configuration data format for EX600-SEN3-X80.
Detailed format for SI unit.
Format for setting IO-Link device parameters.
Steps to prepare configuration data.
How to set the configuration data size.
How to set controller tags.
Diagnostic objects for EtherNet/IP.
Unit and channel diagnosis objects.
Detailed channel diagnosis information.
Continues unit parameter objects.
Channel parameter objects.
More channel parameter objects.
Overview of the EX600 web server functions.
Steps to connect to the web server.
To Next Page
