Need help?Do you have a question about the SMC Networks EX600-SEN3 and is the answer not in the manual?
General| Category | I/O Systems |
|---|---|
| Connectivity Technology | Wired |
| Input Voltage | 24 V DC |
| Output Current | 0.5 A |
| Number of Inputs | 6 |
| Number of Outputs | 3 |
| Operating Temperature | -10 to 60 °C |
| Protection Class | IP20 |
| Product Type | Digital I/O Module |
Procedure for direct mounting of units, including reinforcing brace.
Procedure for mounting units onto a DIN rail.
Procedure for operating the unit's switches.
Details on configuring the unit using DIP switches.
Configuration of IP address using switches.
Method for setting IP address via BOOTP/DHCP server.
Instructions for mounting and installing end plates.
Flowchart to identify and resolve system failures.
Methods to address specific problems and LED indicators.
Defines and explains settable parameters for units.
Defines system-level parameters.
Defines parameters for IO-Link master units.
Table showing input/output bytes for each EX600 unit type.
Illustrates I/O data mapping with sample configurations.
Defines diagnosis modes and their data sizes.
Guide to configuring EX600 using Rockwell Logix DesignerTM.
Enables sending parameters to EX600 via EtherNet/IP.
To Next Page
