SMC Networks EX600-SEN3 User Manual

-107-
No.EX※※-OMX1011
■Parameter setting of IO-Link device with configuration assembly
The Configuration assembly function enables PCL to send parameters to the IO-Link device, which is
connected to the IO-Link master, under the EtherNet/IP communication connection.
Set the Index, subindex and data to be changed by specifying the Unit No., Unit ID and IO-Link port in
accordance with the Operation Manual of the IO-Link device.
*: This function may not be available due to the PLC type.
*: The settable data size in the configuration assembly is 456 bytes maximum.
Configuration format (EX600-LAB1 / EX600-LBB1)
Byte
Bit
EX600-LAB1 / EX600-LBB1
Parameter
Setting value
0
0..3
Unit No.
0..9
4..7
Parameter type
2
1
0..7
Unit ID
EX600-LAB1: 3B (Hex)
EX600-LBB1: 3C (Hex)
On-request Data
2
0..7
Port
1..4
3
0..7
Number of Parameter
1..N
IO-Link Device_Parameter1
4
0..7
Parameter1_Length
1..232
5
0..7
Parameter1_Index[0] (MSB)
Refer to the Operation Manual of the
IO-Link Device
6
0..7
Parameter1_Index[1] (LSB)
Refer to the Operation Manual of the
IO-Link Device
7
0..7
Parameter1_Subindex
Refer to the Operation Manual of the
IO-Link Device
8
0..7
Parameter1_Data[0]
Refer to the Operation Manual of the
IO-Link Device
..
..
..
..
..
0..7
Parameter1_Data[#] # relies on the data length
Refer to the Operation Manual of the
IO-Link Device
IO-Link Device_Parameter2 (When the number of Parameter is 1, no setting is necessary for the data afterwards)
..
..
Parameter2_Lenght
1..232
..
0..7
Parameter2_Index[0] (MSB)
Refer to the Operation Manual of the
IO-Link Device
0..7
Parameter2_Index[1] (LSB)
Refer to the Operation Manual of the
IO-Link Device
..
0..7
Parameter2_Subindex
Refer to the Operation Manual of the
IO-Link Device
..
0..7
Parameter2_Data[0]
Refer to the Operation Manual of the
IO-Link Device
..
..
..
..
..
0..7
Parameter1_Data[#] # relies on the data length
Refer to the Operation Manual of the
IO-Link Device

SMC Networks EX600-SEN3 Specifications

General

Brand	SMC Networks
Model	EX600-SEN3
Category	I/O Systems
Language	English