SMC Networks EX600-SEN3 User Manual

-67-
No.EX※※-OMX1011
•Analogue output unit parameters (1)
No.
Parameter
Definition
Item
Content
Default
setting
Parameter
setting range
1
The power
supply short
circuit
detection for
the output
device
Generates error
when the short
circuit of the output
device is detected.
Enable
Generates an error.

Unit
Disable
Does not generate an
error.
2
Analogue
output range
Sets the range of
the analogue output
device.
0..10 V
Selects the analogue
output range.
0..10 V
Channel
0..5 V
1..5 V
0..20 mA
4..20 mA
3
Analogue
data format
Sets analogue data
type which is
output to PLC.
Offset binary
Offset binary.

Unit
Sign &
Magnitude
Signed binary.
2s complement
2’s complement.
Scaled
Scale conversion type.
4
User setting
value upper
limit error
Generates error
when the output
value exceeds the
set value.
Enable
Generates an error.
1
Channel
Disable
Does not generate an
error.

Scale upper
limit setting
Sets the scale
upper limit.
Generates error
when the output
value exceeds the
upper limit.
Enable
Generates an error.
Val: -32766 to 32767
Disable
Does not generate an
error.
Val: -32766 to 32767

Val: 1000
5
User setting
value lower
limit error
Generates error
when the output
value falls bellow
the set value.
Enable
Generates an error.
1
Channel
Disable
Does not generate an
error.

Scale lower
limit setting
Sets the scale
lower limit.
Generates error
when the output
value falls below
the lower limit.
Enable
Generates an error.
Val: -32767 to 32766
Disable
Does not generate an
error.
Val: -32767 to 32766

Val: 0
6
Output setting
for
communication
error
2
Sets output when
communication
error is occurred.
Enable
Output will be user fault
value.
1
Channel
Disable
Output will be held last
state.


SMC Networks EX600-SEN3 Specifications

General

Brand	SMC Networks
Model	EX600-SEN3
Category	I/O Systems
Language	English