SMC Networks EX600 Series - Configuration Assembly Example; Parameter Setting Devices

-108-
No.EX※※-OMX1011
■Configuration assembly setting method example
The parameter setting for the manifold using Rockwell Automation Logix Designer
TM
is described below.
Unit 0
Unit 1
Unit 2
Unit 3
End
plate
AXA
Analog
Input
Config size
14 byte
AMB
Analog
I/O
Config size
32 byte
LAB1
IO-Link
Config size
46 byte
SEN3-X80
SI unit
(32 outputs)
Config size
27 byte
Valve manifold
(32 coils)
•Parameter setting devices
1. EX600-LAB1 (Unit 2)
2. EX600-SEN3-X80 (Unit 3)
3. ISE20B-L (Connect to IO-Link device, digital pressure switch and port 1 of unit 2)
Pressure switch IO-Link compatible
ISE20B-L
(Connect to Port1)