- 4 -
Warning
If oxygen is used as the fluid, it can lead to serious and unforeseen risks. However, it is possible to
manage and control the risk of hazards and economic loss. In order to use the product safely, it
should only be handled by personnel with appropriate knowledge, with support from a suitably
qualified specialist.
Oxygen gas increases the susceptibility of substances to burning, can be ignited by frictional heat
and static electricity, and makes metal and seal materials burn. Therefore, flush the piping thoroughly
and mount a suitable filter to prevent foreign matter such as metal powder and dust from entering the
product.
Take safety measures by installing safety devices (e.g. a circuit that stops the supply of oxygen gas)
to prevent fire and explosion in the event of failure, taking flameproof safety standards into
consideration.
Since there is an exhaust port on the product, connect the piping in order to exhaust oxygen.
Do not block the exhaust port.
Handling precautions
△
△△
△
,
！
！！
！
Caution
If the power supply to this product is turned off due
to a power failure during normal operation, the
output on the secondary side will be held and air will
flow continuously.
To Next Page
Loading...
Need help?
General
