SMC Networks LECPA Series - Ordering and Options

- 9 -
2.3 How to Order
The part number construction for this product is as follows:
ＬＥＣＰＡＮ□□－ □
Compatible Electric actuator model
Driver type
Parallel I/O type
I/O cable length
Option
*2) Available only with the differential pulse input type.
Only 1.5 m cable is available for the open collector type.
Caution
The driver and electric actuator are factory set Confirm the combination of the driver
and the electric actuator is correct.
<Check the following before use.>
(1) Check the electric actuator label for the model number. Check that this matches the driver.
(2) Check Parallel I/O configuration matches (NPN or PNP)
Driver
(1) (1) (2)
N
NPN type
P
PNP type
Nil
Screw mounting
D
DIN rail mounting
LEFS25B-100
NPN
Nil
None
1
1.5m
3
3m
*2)
5
5m
*2)
Stroke example：For LEFS25B-100B-S3AN1,
specify LEFS25B-100
Rotating angle：For LER10K-2L-R1AN1D,
specify LER10K-2.
(For an electric rotary table, the rotation angle must
also be entered. Note, this product is not specified for
continuous rotation).
BC
Blank controller
*1)
*1)Specified software (LEC-BCW) is required.
Step motor (Servo / 24 VDC)
P
Pulse input type
A
Electric actuator
LEFS25B-100