A
BOUT
THE
T
IGER
S
WITCH
10/100
1-6
manually
◆ Independent RJ-45 10BASE-T/100BASE-TX ports with support for
auto MDI/MDI-X
◆ Unshielded (UTP) cable supported on all RJ-45 ports: Category 3, 4 or
5 for 10 Mbps connections, Category 5 for 100 Mbps connections
◆ Complies with IEEE 802.3 Ethernet, 802.3u Ethernet and 802.3x
Ethernet standards
Fiber Connectivity
◆ Single-port 100BASE-FXMMF multimode fibre port that can run a
link up to 2 km away (using 62.5/125 or 50/125 micron multimode
fiber cable), and operates at 100 Mbps, full duplex, with
auto-negotiation for flow control.
Performance
◆ Transparent bridging
◆ Aggregate bandwidth of up to 1.8 Gbps
◆ Provides Store-and-Forward switching for intra-VLAN traffic
◆ Supports flow control, using back pressure for half duplex and
IEEE 802.3x for full duplex
◆ Broadcast Storm Control
◆ Desktop and rack mountable
◆ Limited lifetime warranty
To Next Page
Loading...
Need help?
General
