EasyManua.ls Logo

SMC Networks ZSE30A series

SMC Networks ZSE30A series
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
-45-
No.PS※※-OML0003-J
<Operation - With security code input- >
Locking
1, Press the
button for 5 seconds or longer in measurement mode.
The current setting "UnL" is displayed.
2, Press the
or button to select keys lock "LoC".
3, Press the
button to store the setting.
Unlocking
1, Press the
button for 5 seconds or longer in measurement mode.
The current setting "LoC" is displayed.
2, Press the
or button to select keys unlock "UnL".
3, When the
button is pressed, input of the security code will be requested.
For how to enter the security code, refer to "How to enter the security code" on page 46.
4, If the security code entered is correct, the display will change to "UnL". Press any of the
, or
buttons to release the key lock and return to measurement mode.
If the security code entered is incorrect, "FAL" will be displayed and the security code must be entered
again. If an incorrect security code is entered three times, "LoC" is be displayed and the display will
return to measurement mode.

Other manuals for SMC Networks ZSE30A series

Related product manuals