‐CW420/430
17
Energyconsumption(kW)display
The Pc option indicates the total kW consumed since
installationofthedishwasherorsincethelatestreset.
Displayofthenumberofcyclesperformed
When scrolling throughtheappliance parameters, the “tc
88888”itemwillalsoappear; thisisthecountofthetotal
cyclesperformedbythedishwashersinceinstallation.
This parameter cannot be modified or reset unless the
softwareisreprogrammed.
This submenu and the relative functions can only be
accessed with the aid of a password available on
SmegTechandonlybytechnicalstaff.
6.2 Quit“SET‐UP“menu
Wait more than 10 seconds without pressing any button and the appliance quits this menu
automatically,
orpresstheon/off buttontoexit.
Indicatorlightsshowing: off;green;orange;flashing.
Caution: the tank and boiler temperatures shown on the display may be differ from the actual
temperaturesbyafewdegrees,especiallyintransientphases(justaftertheFILLiscompleted,justafter
theendofthecycle,etc.)duetotheinertiaofthemeasurementprobe.
6.3 Rinsingtemperaturesetup
Modifythevalueoftheparameterbypressing.
(Defaultvalue:85°C)
Min.71°C–max.85°C
To Next Page
Loading...
Need help?
General
