‐CW420/430
19
6.7 Autostartfunction
Modifytheparameter(ON/OFF)bypressing .
Setat“on”tostartthecyclewhenthedoorisclosed.
Setat“off”forcyclestartafterconfirmationwiththestartbutton
6.8 Regenerationfrequencysetup(modelswithsoftener)
(Defaultvalue:H03;modifytheparametertosuitthemainswaterhardness.
At first use, the salt tank has to be filled. It is subsequently sufficient simply to fill up with
regeneratingsaltwhennecessary.
Modifythe
valueofthe
parameterby
pressing .
Hardness
(°dGerman
degrees)
Hardness(°f
French
degrees)
Setting
level
Regeneratio
noff
Regeneration
off
H00
8.5 15 H01
11 20 H02
17 30 H03
22.5 40 H04
28 50 H05
Regenerationcycleduration:12minutes 33.5 60 H06
With values over 60°dF an external water treatment device must be used and the regeneration
frequencymustbesetonH00.
6.9 tStP(minimumrinsingtemperature)function
Modifytheparameter(ON/OFF)bypressing .
Set at “on” for minimum rinsing temperature as set; set at “off” for rinsing regardless of boiler
temperature.
If the parameter is set as “off” and hot intake water is not used, the minimum rinsing temperature
mightbeafewdegreeslowerthanthesetting.
To Next Page
Loading...
Need help?
General
