‐CW420/430
26
8.4 ChangingtheProgram
With the door closed, to change to a fresh program
instead of repeating the last one, press the button.
Theprogramsavailablearedisplayed.
If a program has already started, press and hold it
downtointerruptit.
changetheprogrambypressing
Confirm the program start by pressingand holding it
downfor1second(lightL2changesbacktoorange).
N.B.:
Duringheatingofthewaterintheboilerandtankwiththecyclerunning,thetankheatingelement
andboilerheatingelement symbolsmayappearonthedisplay.
Filterpresencesensor(onsomemodelsonly)
Thefilterisfittedwithasensorwhichchecksthatitisproperlyfitted;ifitisnotinthecorrectposition,
theword“FiLter”appearsonthedisplay.
9 CHOOSING THE PROGRAM
PROGRAM TYPEOFDIRT DURATION(*)
P1 Glasses Short,about1’30”;
1’withglasswarefunctionactive.
P2 Glasses,cupsandplateswithlightdirt Average,about2’30”;
2’withglasswarefunctionactive.
P3 Verydirtydishesandcutlery Long,about4’;
5’30”withsanifunctionactive.
(*) The cycle duration stated above refers to three‐phase appliances supplied with hot water at
>50°C <60°C. If the appliance is supplied with cold water, the cycle duration might increase
depending on the intake water temperature, since the dishwasher is fitted with the HTR
system,whichrequiressettemperatureandpressureforrinsing.
To Next Page
Loading...
Need help?
General
